Custom Axial Fans, Vaneaxial, Tubeaxial, and Tubular Centrufugal Blowers.
Design Options for Construction:
Mild steel housing with aluminum propeller.
Hot Dip Galvanized Construction.
AMCA 'B' and 'C' Construction, Mild steel housing with an aluminum prop with an aluminum striker plate.
All Aluminum Construction (AMCA 'A') -- Aluminum housing with standard aluminum prop. Housing flanges are welded solid.
Stainless Steel Air Stream, 304 Stainless Steel housing with standard aluminum prop. Housing flanges are welded solid. Hardware is 304 Stainless Steel.
Belt Guard -- Stainless, or coated steel OSHA belt guard with 1/2" expanded metal safety guard enclosing motor sheave and belts. Not needed when motor cover is ordered.
Hinged Access Door -- Allows limited inspection and cleaning of fan interior.
Flanged Inlet, Drilled with EPDM Gaskets.
Flanged Discharge, Drilled with EPDM Gasket.
Companion Flanges -- Angle iron ring with matching punched holes used to align duct work with
fan inlet and outlet flanges. Available in standard sizes only.
Inlet Vane Control Damper -- For volume reduction with corresponding BHP savings - Maximum velocity
3,000 FPM, Maximum pressure at block-off 7" SP, Maximum temperature 250 degrees F. Manual
lever operator included.