Roof Exhausters
| Type: | Product Features: |
|
Direct Driven Low Silhouette Roof Exhauster |
Sizes: 24” – 120” • CFM Range: 5,000 – 100,000 + • Statically and Dynamically Balanced Aluminum Propeller • All Galvanized Steel Construction • Variable Pitch Drives Standard Through 3 HP • Drives Sized for a Minimum 150% of Drive Horsepower • 1 Year Fan and Motor Warranty • Removable Panel for Easy Damper Access • Heavy Duty 200,000 Hour Rated Pillow Block Bearings • Low Profile • Integral Deep Spun Inlet • Motor: Open Drip Proof • Bird screen: ½” mesh, 19 ga. galvanized steel • Complete Operation & Maintenance instructions along with assembly drawings, supplied with fan shipment • Units have been tested and rated in accordance with AMCA standards and are guaranteed to perform as stated. |
|
Belt Driven Low Silhouette Roof Exhauster |
Sizes: 24" - 60" • CFM Range: 7,000 - 51,000 • Static Pressure to 1/2" • Statically and Dynamically Balanced Epoxy Coated Steel Propeller • Galvanized Steel Windband • Galvanized Steel Butterfly Dampers • Galvanized Curb Cap with fully welded corners • Lifting Eyes at all four corners of Curb Cap • Heavy Galvanized Schedule 40 Pipe Frame • Stainless Steel Damper Rod • Integral Galvanized Steel Rain Channel • Die Formed Epoxy Coated Steel Propeller Blades • Heavy Epoxy Coated Steel Hub Plate. Keyed to Fan Shaft. • Motor is nationally recognized and locally serviced. ODP is Standard. • V-Belt Drive with adjustable Motor Sheave (Standard through 3HP) • Cast Iron Pillow Block Bearings with Lube Fittings - Average life of 200,000 hours.
|
|
High Velocity Up-Blast Roof Exhauster |
CFM Range: 5,000 –
100,000 + • Statically and Dynamically Balanced Aluminum Propeller • All Galvanized Steel Construction • Variable Pitch Drives Standard Through 3 HP • Drives Sized for a Minimum 150% of Drive Horsepower • 1 Year Fan and Motor Warranty • Removable Panel for Easy Damper Access • Heavy Duty 200,000 Hour Rated Pillow Block Bearings • Low Profile • Integral Deep Spun Inlet • Motor: Open Drip Proof • Bird screen: ½” mesh, 19 ga. galvanized steel • Complete Operation & Maintenance instructions along with assembly drawings, supplied with fan shipment • Units have been tested and rated in accordance with AMCA standards and are guaranteed to perform as stated.
|
|
Hooded Roof Exhauster or Filtered Supply Fan |
Sizes: 24” – 120” • CFM Range: 5,000 – 100,000 + • Statically and Dynamically Balanced Aluminum Propeller • All Galvanized Steel Construction • Variable Pitch Drives Standard Through 3 HP • Drives Sized for a Minimum 150% of Drive Horsepower • 1 Year Fan and Motor Warranty • Removable Panel for Easy Damper Access • Heavy Duty 200,000 Hour Rated Pillow Block Bearings • Low Profile • Integral Deep Spun Inlet • Hinged Hood for easy Access • Motor: Open Drip Proof • Bird screen: ½” mesh, 19 ga. galvanized steel • Complete Operation & Maintenance instructions along with assembly drawings, supplied with fan shipment • Units have been tested and rated in accordance with AMCA standards and are guaranteed to perform as stated. |
Heavy duty industrial AIR MOVING EQUIPMENT:
fans and blowers – STANDARD AND CUSTOM, STEEL, fIBERGLASS, 316 ss AND aLUMINUM. INDUSTRIAL silencers, flexible duct connectors, CUSTOM ac variable speed drives AND MOTOR CONTROLS, AIR FILTERS, AIR SYSTEM DESIGN & TESTING. REPLACEMENT PARTS, SERVICE, INSTALLATION, REPAIRS, & UPGRADES.
fanair co., orange, ca PH (714) 744-6444 fax (714) 744-5100
Back
to main page.